Burcucumber (Sicyos angulatus)
Unfortunately, at this point in the season, few products are labelled and applying those that are can be even more difficult. The only viable option might be to use a harvest aid prior to corn or soybean grain harvest. In corn, this type of application requires high clearance equipment or aerial application; hopefully, these fields are the exception and not the norm. Below is a brief list of products available for late season application or as a harvest aid for corn and soybeans.
- Aim 2EC -- May be applied 3 days before harvest at 2 fl oz/acre. Use as a harvest aid to desiccate certain broadleaf weeds. Apply in 10 gal/A water. Include necessary adjuvants and make sure spray coverage is sufficient otherwise poor control will result.
- Basagran -- No restrictions
- Defol 5L -- Can be applied to desiccate problem weeds in early maturing corn. Apply 4.8 qt/acre, 14 days before harvest in 10-20 gallons/acre water.
- Impact/Armezon -- Can be applied up to 45 days prior to harvest.
- Glyphosate -- Up to 0.75 lb ae/acre (32 fl oz of a 3 lb ae/gal formulation) to corn a week or more prior to harvest. Must be applied to grain when moisture is 35% or less and after maximum kernel fill.
- Gramoxone SL -- Apply 1.2 to 2 pt/acre after black layer and at least 7 days before harvest. The higher rate can be used to desiccate mature broadleaves and grasses over 18 inches tall. Be sure to include a nonionic surfactant.
- 2,4-D LV4 -- Apply 1 to 2 pt/acre after the hard dough or dent stage. Do not forage or feed corn fodder for 7 days after application.
- Aim 2EC -- Apply 2 fl oz/acre as a harvest aid to desiccate certain broadleaf weeds. Application shall be made when the crop is mature and the grain has begun to dry down and at least 3 days before harvest. Apply in 10 gal/A water. Include necessary adjuvants and make sure spray coverage is sufficient otherwise poor control will result.
- Clarity -- Apply 8 fl oz to 2 quarts after soybean pods have reached a mature brown color and at least 75% leaf drop has occurred. Wait at least 7 days before harvest.
- Defol 5L -- Can be applied to desiccate problem weeds in early maturing corn. Apply 4.8 qt/acre, 7-10 days before harvest in 10-20 gallons/acre water.
- Glyphosate -- In Roundup Ready soybeans, glyphosate may be applied through flowering (R2 stage) for late season control. For pre-harvest, glyphosate may be applied to Roundup Ready and conventional soybeans after 80% leaf drop (loss of all green color). Apply up to 0.75 lb ae/acre (32 fl oz of a 3 lb ae/gal formulation) in 10-20 gallons of water/acre to control weeds that may interfere with harvest or to control perennials such as quackgrass or Canada thistle. Allow a minimum of 7 days between application and harvest. Do not graze or harvest for hay within 25 days of application.
- Gramoxone SL -- Apply 8 to 16 fl. oz/acre plus nonionic surfactant (1 qt/100 gallons of spray) to soybean plants that are mature (65% or more of the seed pods have reached mature brown color or seed moisture is 30% or less. Do not apply within 15 days of harvest and do not graze or harvest for forage or hay.
A special note on burcucumber:
With the wet weather we have been experiencing this summer, conditions are ideal for late season burcucumber problems in corn and soybean. Under these conditions, burcucumber can germinate and emerge late into the season and it's not until it gets above the crop canopy that it is often noticed. This late in corn, there are few options for managing this troublesome weed. Aside from the corn herbicides mentioned above, Beacon (applied before tassel emergence) and Maestro (formerly Buctril) can also be sprayed until tassel to slow burcucumber. As we get near harvest, the pre-harvest applications are targeting grain production prior to a frost and really are intended just to allow combine harvest of the crop. Gramoxone is probably the most effective of these three options at this time.
In soybean, as noted above, only glyphosate, Gramoxone, Clarity, and Aim may be used for late season control. Again, Gramoxone is probably the most effective of these treatments for burcucumber control.
Finally, if burcucumber can be harvested for silage and the seeds are immature or still green, the ensiling process will kill the seeds. If the corn or soybean is harvested for grain, the mature seeds will simply end up back in the field (or in the grain) making the problem worse for future years. Also, as you make plans for next season, include no-till in fields that are infested with burcucumber. Research suggests that no-till allows burcucumber seed to remain near the soil surface, thus allowing germination to occur over a shorter time period and reducing the number of germination flushes. This also improves herbicide effectiveness and performance.