John D. Byrd, Mississippi State University, Bugwood.org
Most cover crops are fairly easy to control in a burndown program as long as you pay attention to detail. There are a few species that may require special consideration. In general, most programs begin with glyphosate, which tends to be more consistent than paraquat (Gramoxone). Liberty has a narrow fit, mostly for marestail control, but does not add much for cover crops. The effectiveness of different herbicides on cover crops is provided in Table 2-4 from the 2016 Mid-Atlantic Weed Management Guide.
Here are some considerations as you get into the field this year.
Guidelines for glyphosate
All cover crops should be actively growing and capable of intercepting the herbicide spray (e.g. not covered with crop residue). Key points are:
- Adjust the rate based on the target species.
- Avoid applications when the weather is cool and cloudy (<55 F).
- Add AMS or another water softening agent to prevent negative interactions with hard water and other pesticides.
- Avoid tank mixing with higher-rate (> 0.25 lb) clay-based herbicides (WDG, WG, DF, DG, F) like atrazine, simazine, and metribuzin or increase the glyphosate rate.
Guidelines for Gramoxone SL
- Apply in 20 gallons per acre or more liquid carrier.
- Use flat fan nozzle tips that produce a uniform spray pattern and thorough coverage.
- Be sure to include an appropriate nonionic surfactant.
- Add a triazine herbicide (atrazine, metribuzin, etc.) to Gramoxone to increase burndown activity.
- Using UAN as a partial carrier will also increase the activity.
- Use a clean water source that does not contain soil or other sediment that can reduce Gramoxone activity.
Cereal rye is generally fairly easy to control. On occasion we can have problems because of cool weather at application time and/or antagonism when tank mixing glyphosate with triazines. Also, remember that Gramoxone is most effective on cereals when applied prior to tillering or after the boot stage. It is especially important to include a triazine herbicide with Gramoxone if you are terminating cereal rye or other small grains prior to the boot stage.
Some research suggests that wheat is less susceptible to control with glyphosate than cereal rye. In general, make sure you have a sufficiently high glyphosate rate and follow other guidelines to maximize herbicide activity. The Roundup Powermax label recommends 32 fl. oz (1.125 lb) up 18-inch tall wheat. For glyphosate, control is better for applications made prior to the boot stage of growth. Gramoxone can also be effective, but rate, adjuvant, spray volume, nozzles, timing (prior to tillering or after boot), and the addition of atrazine or metribuzin are important for effective control.
Annual ryegrass continues to be somewhat challenging to control. Glyphosate is the preferred herbicide and paraquat (Gramoxone) does not provide consistent control. Application during sunny warm days is best and cloudy weather will slow activity. Under cool conditions, it may take 2 to 3 weeks to kill the ryegrass and a second application may be necessary. Previous research suggests that small ryegrass is easier to control, but mild air temperatures 1 to 2 days before, during, and 1 to 2 days after application are important. Apply glyphosate at 1.25 to 1.5 lb ae/acre with AMS and do not tank-mix with herbicides that could potentially reduce glyphosate activity.
Hairy vetch, red clover, and crimson clover
For control of most clovers or other legume cover crops, glyphosate alone is generally not effective, but is useful in mixture with other herbicides. Gramoxone alone is also not very effective on legumes and should be mixed with atrazine or metribuzin for increased performance. Dicamba (Banvel/Clarity) is one of the best herbicides for control of legume cover crops. It is often a necessary tank-mix partner with glyphosate for control of red or white (ladino) clover. A 2,4-D ester formulation will effectively control hairy vetch and field peas, but not the clovers. Both 2,4-D ester and dicamba can be tank-mixed with glyphosate without loss in activity and can be used in corn. For corn, apply dicamba or 2,4-D ester 7 to 14 days before planting or 3 to 5 days after planting for greater crop safety and plant corn at least 1.5 inches deep. Clopyralid is also effective on legumes and is a component of several corn herbicides. Dicamba and clopyralid are not suitable for soybean and 2,4-D ester (1 pt) must be applied at least 7 days ahead of soybean planting.
Crimson clover is easier to control than the other clovers and either glyphosate or Gramoxone are fairly effective. We conducted a trial last year looking at crimson clover control in corn. Interestingly, our results showed the 2,4-D and dicamba (Clarity) were slow acting and not very effective, while Gramoxone was the most effective early followed by glyphosate (see Table 1 below).
Canola is sometimes included in cover crop mixtures and generally over winters in our region. Canola can be somewhat challenging to control in spring because glyphosate is somewhat weak and big canola can be difficult to control. Application timing is important to achieve adequate control. Usually adding 1 pt of 2,4-D ester to glyphosate will provide adequate control of smaller canola. Gramoxone plus atrazine or metribuzin should also provide good control of smaller canola. Dicamba is not effective on canola or other brassica species.
Table 1. Effect of herbicide treatments on crimson clover control in corn. Trial was conducted at Rock Springs in 2015. Herbicides were applied on May 18, 2015. The crimson clover was 12 inches tall and beginning to flower at application time.
|Rated May 29|
|Rated June 13|
|2,4-D LVE 4L||16||65||84|
|2,4-DLVE + Clarity||8 + 8||70||86|
|Roundup PowerMax 4.5 L||22||85||94|
|Roundup PowerMax 4.5 L||32||87||96|
|Roundup PM + 2,4-D LVE||22 + 16||88||95|
|Roundup PM + Clarity||22 + 8||88||95|
|Roundup + 2,4-D + Clarity||22 + 8 + 8||85||94|
|Gramoxone 2L + NIS||48 + 0.25% v/v||94||91|
|Gramoxone 2L + Atrazine 4L + NIS||48 + 32 + 0.25%||94||96|