Charles David Ray, Ph.D.
Associate Professor, Ecosystem Science and Management
Have a question?
Search for Education by Charles David Ray, Ph.D.!View All Education from Charles David Ray, Ph.D.
Most recent education by Charles David Ray, Ph.D.
Analysis of natural resources systems; wood identification and taxonomy; forest industry economics; wood products operations management; process control, simulation, and optimization; statistical quality control; relationships of wood, moisture, product properties, and environmental emissions; artificial intelligence; lean manufacturing; quality management systems.
Current Research/Educational Projects:
September, 2014: “Radio-Frequency Technology as an Alternative Phytosanitary Treatment to Methyl Bromide Fumigation for Wood in World Trade.” Collaborating investigator with Kelly Hoover and John Janowiak. USDA CSREES Methyl Bromide Transitions Competitive Grants Program.
May, 2013: "Investigation and Reorganization of the Penn State Wood Collection into an Active Research and Educational Xylarium." Internally Funded.
Recent Research/Educational Projects:
May, 2013: “Across the Supply Chain: Developing Education and Outreach in Forest Bioenergy.” Collaborating investigator with M. Jacobson and D. Ciolkosz. Funded by the Northeast Sun Grant Initiative, US Department of Energy.
October, 2012: "Project-Based Overview of Woody Biomass Initiatives in the Generation of Thermal Energy and Electricity in the Eastern Region of the United States.” USDA Forest Service, in collaboration with Wilson Engineering Services.
March, 2010. “Simulating a Nationwide White-wood Pallet Pool.” Collaborating investigator with Judd Michael. Funded by the Pallet Foundation, Alexandria, VA.
May, 2009. “Simulation of push/pull manufacturing in
dimension mill operation.” Principal Investigator. USDA Forest Service, Princeton, WV.
April, 2009: “Understanding PA Biomass and ‘Energy Wood’ – Wood Flow and Availability
for Energy Utilization in Pennsylvania”. Co-PI with Judd Michael. Pennsylvania Hardwoods Development Council.
March, 2009: “Project-Based Overview of Woody
Biomass Initiatives in the Generation of Thermal Energy, Electricity, and
Transportation Fuels in the Eastern Hardwood Region of the United States.” Principal Investigator. USDA Forest Service, Princeton, WV.
July, 2008: “Forest Bio-Energy Techniques and Technologies: Pennsylvania Extension Programming Development from Austrian site visits.” Principal Investigator. Penn State Agricultural Extension Seed Grant.
April, 2008: “Determining Costs, Product Recovery Factors, and Environmental Impacts for Biomass Harvest Treatments in Northeastern Forests.” Collaborating Investigator with McDill, et al. Funded by the Northeast Sun Grant Initiative, US Department of Energy.
February, 2008: “Establishment of an Institute for Hardwood Industry Innovation and Sustainability.” Collaborating Investigator with Michael, et al. Wood Education Resource Center, USDA Forest Service, Princeton, West Virginia.
March 2008: “Wood, Plastic, and Corrugated Packaging Materials: A Comparative Study of Environmental Attributes.” Co-PI with Judd Michael. National Wooden Pallet and Container Association, Alexandria, VA.
February, 2008: “Microwave Technology Approval and Phytosanitary Treatment Compliance.” Cooperating Investigator with Janowiak, et al. USDA – CSREES, Washington, DC.
June, 2005: “Economic Impact Assessment of International Regulation on the Wooden Pallet Industry and Allied Industries – Topic 1: Assurance of Bark-free Construction.” Principal Investigator. National Wooden Pallet and Container Association, Alexandria, VA.
January, 2005: “Assessing, Compiling, and Leveraging Lean Production Achievement in the US Wood Products Industry.” Principal Investigator. Funded by the USDA Forest Service, Princeton, WV.
April, 2004: “Toward the development of a nationally-recognized wood flooring educational program.” Principal Investigator. Joan Luerssen Faculty Enhancement Fund, Penn State College of Agriculture.
February, 2004: “Extending Education Capacity Related to Sustainable Forest Management to Bulgaria.” Cooperating Investigator with Finley and Luloff. COAS Seed Grant Program, Penn State University.
January, 2004: “Integration of ROMI optimization engine with dimension mill process flow
simulation.” Principal Investigator. USDA Forest Service, Princeton, WV.
June, 2003: “Financial Analysis – Renting vs. Purchasing Pallets.” Principal Investigator. The Pallet Foundation/National Wooden Pallet and Container Association, Alexandria, VA.
May, 2003: “Dielectric and Microwave Applications for the Phytosanitary Treatment of Wood Packing Materials.” Cooperating Investigator with Janowiak, et al. Competitive Grants Program, USDA – CSREES, Washington, DC.
April, 2003: “WoodPro 2004 – A Special Issues Forum for the Hardwood Industry.” Principal Investigator. Pennsylvania Hardwoods Development Council, Harrisburg, PA.
April, 2003: “Lean Manufacturing for the Value-Added Hardwood Industry.” Co-Principal Investigator with Judd Michael. Pennsylvania Hardwoods Development Council, Harrisburg, PA.
Ray, C.D., L. Ma*, T.Wilson, D. Wilson, L. McCreery, and J. Wiedenbeck. 2014. “Biomass boiler conversion potential in the eastern United States.” Renewable Energy 62(2014):439-453.
Ray, C.D. 2013. “On calculating the green weight of wood.” World of Wood 66(6):16-21.
Ray, C.D. 2013. “Soft hardwood, hard softwood, and vice versa.” World of Wood 66(5):5-7.
Ghorbannezhad, P., M. Azizi, C. Ray, C. Yoo, and O. Ramazani. 2013. "Application of sensitivity analysis for assessment of energy and environmental alternatives in the manufacture by using analytic hierarchy process." Env. Protection. Eng. 39(3):5-20.
Elser, N., J.H. Michael, M. Gagnon, and C.Ray. 2012. “Knowledge Resources and Firm Performance: A Packaging Industry Perspective.” Journal of Applied Packaging Research 6(4):225-238.
Ciolkosz, D. E., Ray, C. D., and L. Ma. 2010. “Modeling of Forest Biomass Energy Potential in Pennsylvania.” Presented at the 2010 Annual International Meeting of the ASABE. June, 2010. Paper #1008984.
Anil, S.K.*, C.D. Ray, and G.E. Okudan Kremer. 2010. Comparison of Pallet Life Cycle Using LCA and Multiobjective Dynamic Programming. Proceedings of the Thirty-First Annual Conference, ASEM 2010. American Society for Engineering Management.
Scholl, M.S., J.K. Wiedenbeck, P.R. Blankenhorn, C.D. Ray, L.R. Stover, and B.W. Beakler. 2008. “A comparison of kiln-drying schedules and quality outcomes for 4/4-thickness black cherry lumber sawn from small-diameter logs.” Forest Prod. J. 58(12):41-48.
Michael, J.H., and C.D. Ray. 2008. “Management decisions in the forest products industry: Where good companies go astray.” Forest Prod. J. 58(10):6-14.
Ray, C.D., A. Laddad*, and J. Ventura. 2007. “The impact of cutting bill variability and product flow for a hardwood dimension mill as determined through discrete event simulation.” Wood Fiber Sci. 39(4):614-627.
Ray, C.D., J. Janowiak, J. Michael, and H. Bachev. 2007. “Economic and Environmental Impact Assessment of Proposed Bark-Free Requirements for Wood Pallets in International Trade.” J. Forest Prod. Bus. Research 4(6).
Ray, C.D., N. Gattani*, E. del Castillo, and P.B. Blankenhorn. 2007. “Identification of the relationship between equilibrium moisture content, dry bulb temperature, and relative humidity using regression analysis.” Wood Fiber Sci. 39(2):299-306.
Ray, C.D. 2007. “The Virtual Extension Specialist.” Journal of Extension 45(2).
Ray, C.D., V. Wadhwa*, and J.H. Michael. 2007. "Impact of Overrun on Optimal Performance of Hardwood Sawmills. Wood Fiber Sci. 39(2):291-298.
Ray, C.D. and E. Deomano. 2007. “Bark occurrence in U.S. and Canadian wooden pallets and containers.” Forest Prod. J. 57(3):84-88.
Michael, J.H., Z.G. Guo, J.K. Wiedenbeck, and C.D. Ray. 2006. “Production supervisor impacts on subordinates’ safety outcomes: An investigation of Leader-Member Exchange and Safety Communication.” J. Safety Res. 37(2006) 469-477.
J.K. Wiedenbeck, and C.D. Ray. 2006. “Production supervisor impacts on
subordinates’ safety outcomes: An investigation of Leader-Member Exchange and
Safety Communication.” J. Safety Res. 37(2006) 469-477.
Ray, C.D., J.H. Michael, and B.N. Scholnick. 2006. “Supply-chain system costs of
alternative grocery industry pallet systems.” Forest Prod. J. 56(10):52-57.
Ray, C.D., X. Zuo, J. Michael, and J. Wiedenbeck. 2006. “The Lean Index: Operational ‘Lean’ Metrics for the Wood Products Industry.” Wood Fiber Sci. 38(2):238-255.
Scholl, M.S., P.R. Blankenhorn, L.R. Stover, and C.D. Ray. 2005. “Reduction in Kiln Drying Time for Black Cherry Lumber.” Forest Prod. J. 55(12):77-82.
Ray, C.D., E. del Castillo, N. Gattani*, and P.R. Blankenhorn. 2005. “Time Series Techniques for Dynamic, Real-Time Control of Wood Drying Processes.” Forest Prod. J. 55(10):64-71.
Gattani*, N., E. del Castillo, C.D. Ray, and P.R. Blankenhorn. 2005. “Time Series Analysis and Control of Dry Kilns.” Wood Fiber Sci. 37(3):472-483.
Beakler, B.W., P.R. Blankenhorn, L.R. Stover, and C.D. Ray. 2005. “Total organic
compounds released from dehumidification drying of air-dried hardwood lumber.” Forest Prod. J. 55(2):57-61.
Evans, D., J. Michael, J. Weidenbeck, and C.D. Ray. 2005. “The Effects of Organizational Climates on Safety-Related Events at Four Wood Products Manufacturers.” Forest Prod. J. 55(6):23-28. Climates on Safety-Related Events at Four Wood Products Manufacturers.” Forest Prod. J. 55(6):23-28.
Charles David Ray, Ph.D.
Michael Jacobson, Ph.D., Charles David Ray, Ph.D.
Charles David Ray, Ph.D.